en
62
Replacing the rechargeable battery
You will require an original Miele lithium-
ion rechargeable battery:
– YCR-M05 for Scout RX2
– YCR-MT12 for Scout RX2 Home Vis-
ion
Do not use non-rechargeable
batteries.
The rechargeable battery compartment
is located in the robot vacuum cleaner's
storage compartment.
Remove the dust box.
Open the rechargeable battery com-
partment by unlatching the cover up-
wards.
Scout RX2 (YCR-M05)
Carefully pull the cables so that the
plug connection is pulled out of the
slot.
Press the latch on the plug connec-
tion in order to release the plug.
Remove the rechargeable battery.
Insert the plug of the new re-
chargeable battery into the counter-
part, making sure it clicks into place.
Insert the rechargeable battery care-
fully, making sure it is properly posi-
tioned (see right-hand side of pic-
ture).
Store the plug connection in the slot
at the side.
Carefully refit the cover of the re-
chargeable battery compartment and
close it, making sure it clicks into
place.
Observe the special instructions re-
garding the handling and disposal of
the old rechargeable battery found in
the sections “Warning and Safety”
and “Caring for the environment” at
the beginning of these operating in-
structions.
Scout RX2 Home Vision (YCR-MT12)
Carefully remove the rechargeable
battery until the plug connection is
exposed.
Downloaded from www.vandenborre.be
