Replacing the Active HEPA
filter
Do not use more than one exhaust
filter at a time.
^
Open the dust compartment lid.
^
Raise the filter and remove it.
^
Replace with a new filter, and push it
down into place.
If you wish to replace the Active
HEPA filter with a Super Air Clean
filter, see "Replacing one type of
exhaust filter with another".
^
Close the dust compartment lid
firmly. It should click into place.
Resetting the exhaust filter change
indicator
The filter change indicator needs to be
reset each time the filter is replaced. To
do this the vacuum cleaner must be
switched on.
^
Press the reset button.
The exhaust filter change indicator
goes out and resets to zero.
The filter change indicator can only
be reset by pressing the reset
button after the light has come on.
Pressing the button at any other time
will have no effect.
Maintenance and care
27
Содержание S 5981
Страница 4: ...Guide to the appliance 4 ...
Страница 40: ...Alteration rights reserved S 5981 4507 M Nr 07 176 000 00 ...