Miele PWM 912 Скачать руководство пользователя страница 57

Страница: 57 / 68

Supervisor level

Program pack-
ages

The selection of programs can be expanded by activating single
programs from the target group program packages.

The programs selected from the program packages (marked in or-
ange) are displayed under program selection.

Sort programs

Programs can be moved within the program list and in the Favorites
list.

Factory default: Off

Moving programs



Touch the sensor control for the program you want to move.



Press and hold the sensor control until the frame changes.



Drag the program to the required place.

Program color al-
location

You can assign a color to a Favorite program. In the list of Favorites,
each Favorite program is given a colored frame, which can be ad-
justed.

Factory default: On

Hygiene

If a program at a temperature below 140°F (60°C) has been used, a
request to start the

Maintenance Wash Hygiene

program appears in

the display.

Factory default: Off

Expert code

A code has to be entered to cancel a disinfection program. The code
can be modified.

The code is: 0 0 0

Make a note of your new code if you ever change it.

Содержание PWM 912





































































Результаты поиска

Содержание PWM 912

Отзывы:

Бренды по названию

Популярные бренды

Miele PWM 912, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PWM 912

Отзывы:

Бренды по названию

Популярные бренды