manualshive.com logo in svg

Miele PWM 912, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele PWM 912 Скачать руководство пользователя страница 50

Changing the program sequence

50

Changing a program

Altering the wash
program

Before selecting a new program, cancel the current program and se-
lect a new one.

Canceling a program

You can cancel a wash program at any time after it has started.

Touch the 

Start/Stop

 sensor button.

The following will appear in the display:

 

Cancel the program?

Select 

yes

.

The following will appear in the display:

Program cancelled

.

The suds are pumped away.

Wait until the door unlocks.

Pull open the door.

Remove the laundry.

Switching on the washing machine after a power failure

If the washing machine is switched off with the 

 button during a

wash program, the program will be interrupted.

Switch the washing machine back on with the 

 button.

Note the message in the display.

Touch the 

Start/Stop

 sensor button.

The program will also be interrupted if power is interrupted by a
power outage.

When power is restored, confirm the message in the display with

OK

.

Touch the 

Start/Stop

 sensor button.

The program continues.

Содержание PWM 912





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды