Programme chart
37
Pre-treat mops programmes (ready to use - rtu)
– Mops are washed and pre-treated in one cycle.
– A pre-spin* and a pre-rinse cycle are carried out before the main wash.
– There is no water intake via the fabric softener compartment during the
disinfection process.
Mops +rtu
60°C
Max. load 8.0 kg
Items
Cotton, mixed fibre or microfibre mops
Notes
Add the pre-treating agent via the fabric softener compartment or
the external dispensing system.
0–60
sec
Extras: 2nd Pre-rinse
, Microfibre
Rinse cycles: 2-5*
Mops plus + rtu
40°C to 90°C
Max. load 8.0 kg
Items
Cotton, mixed fibre or microfibre mops
Notes
Add the pre-treating agent via the fabric softener compartment or
the external dispensing system.
0–60
sec
Extras: 2nd Pre-rinse
, Microfibre
Rinse cycles: 2-5*
Disinfect mops + rtu
85°C
Max. load 8.0 kg
Items
Cotton, mixed fibre or microfibre mops
Notes
– Further disinfection methods can be selected.*
– Use powder detergent containing a bleaching agent.
0–60
sec
Extras: 2nd Pre-rinse
, Microfibre
Rinse cycles: 3-6*
Disinfect mops + rtu
70°C
Max. load 8.0 kg
Items
Cotton, mixed fibre or microfibre mops
Notes
– Further disinfection methods can be selected.*
– Use specialist detergents. Observe the country-specific
guidelines for disinfection.
0–60
sec
Extras: 2nd Pre-rinse
, Microfibre
Rinse cycles: 3-6*
Mops rtu
Max. load 8.0 kg
Items
Cotton, mixed fibre or microfibre mops
Notes
– For pre-treating clean mops.
– Add the pre-treating agent via the fabric softener compartment
or the external dispensing system.
0–60
sec
Rinse cycles: 1
* Settings can be altered in the Supervisor level.
