Using for the first time
23
Removing the transit bars
The display will remind you to remove
the transit bars.
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.
Confirm that the transit bars have
been removed with the
OK
sensor.
The following appears in the display:
Continue setting up as described in the
Operating instructions
Confirm the message with the
OK
sensor.
Completing the commissioning
process
To complete commissioning, the
Cleaning cloths thermal
disinfection
programme must be run
without laundry and without detergent.
If the power is interrupted prior to the
start of the first wash programme (e.g.
if the machine is switched off with the
button), the initial commissioning
process can be completed again.
Once a wash programme has been
running for over 20 minutes, the initial
commissioning process does not need
to be performed again.
Turn on the water taps.
Turn the programme selector
to
Cleaning cloths thermal
disinfection
.
1400
Disin. clean. cloths
85 °C
h
1:05
min
I 15
Touch the
Start/Stop
sensor.
When the programme has finished, your
machine is ready for use for the first
time.
