Miele PT 8257, Инструкции по эксплуатации и монтажу

Страница: 52 / 116

Control elements
a
Display
1 Cottons extra dry 0%
2 Cottons dry 0%
3 Cottons damp 20%
FC A
After switching on, the "Welcome" display will appear
for a short time followed by the program list. The most
recently used program is highlighted.
b
Function buttons
The six buttons underneath the display are the functi-
on buttons. These buttons have specific functions de-
pending on the status of the machine.
These functions will be listed in the display above the
buttons and will be highlighted once selected.
If the machine is reprogrammed to "Direct button allo-
cation" the first 6 programs listed in the display can
be selected directly via these buttons.
c
Start button
The lightring will flash when a selected program can
be started. Pressing the Start button will start the pro-
gram. After a program has started, pressing this but-
ton will show the display as it was before the start of
the program.
d
PC / Optical interface
This interface is used for transferring data to the con-
trol unit from a PC and vice versa.
e
Rotary selector
Turning the selector brings up options and menus in
the display.
Pressing the selector confirms your selection.
f
Chip card reader (optional)
If the machine has been programmed for card opera-
tion, you can only use those programs stored on the
card to dry laundry.
Insert the card in the direction of the arrow (on the
card).
g
I Mains on switch
Switches the machine on.
h
0 Mains off switch
Switches the machine off.
8
Guide to the machine