Other problems
Problem
Possible cause
Remedy
The drying
process goes on
too long or even
switches off.
You might be asked to
clean the ducting system
again.
Please check all possible
causes, described below.
The fluff filter is blocked.
– Remove any fluff.
The filter housing is
blocked with e.g. fluff and
hair.
– Clean the filter housing.
– The cover in the door
opening can be removed to
facilitate the cleaning of the
filter housing below.
The vent ducting or the
ventilation outlet is
blocked with e.g. fluff or
hair.
– Check all parts of the vent
ducting system on a regular
basis (e.g. bends in the
ducting etc.) and clean them
if necessary.
Ventilation to the dryer is
insufficient (e.g because it
is installed in a room
which is too small).
Open a door or window while
the tumble dryer is in operation
for increased air flow.
The laundry has not been
spun sufficiently.
Make sure that your laundry is
thoroughly spun at the
appropriate spin speed in the
washing machine.
The tumble dryer has
been overloaded.
Do not exceed the maximum
load for the programme
selected.
Metallic components, e.g.
zips, have prevented the
dryer from registering the
correct moisture level in
the laundry.
– Open zips next time.
If the problem occurs again,
dry garments with long zips
using the Hot air programme
(timed drying).
Problem solving guide
37
