Miele PT 5136 OS, Руководство по эксплуатации и установке

Страница: 4 / 56

Use
~
Do not install a clothes dryer with
flexible plastic venting materials. If
flexible metal (foil type) duct is
installed, it must be of a specific type
identified by the manufacturer as
suitable for use with clothes dryers.
Flexible venting materials are known to
collapse, be easily crushed, and trap
lint. These conditions will obstruct
clothes dryer airflow and increase the
risk of fire.
~
Use flexible or rigid metal pipe for
venting. Non-metallic flexible hose
should not be used, it is a potential fire
hazard.
~
The appliance shall not be
exhausted into a chimney, a wall, a
ceiling, an attic, a crawl space, or a
concealed space of a building.
~
The installation of this unit at non
stationary locations (e.g. ships) must be
performed by a qualified installer or
service agency, in strict accordance
with national and local safety
regulations and standards.
~
The dryer must not be used without
an exhaust duct.
~
The dryer must not used without the
lint filter in place or with a damaged lint
filter.
~
Check regularly on the exhaust
parts (e.g. wall vent duct, louvered wall
vent, bends etc.) for air permeability.
Lint can collect and block the air flow.
If an exhaust hose is already installed, it
should be checked before connected
to the dryer.
~
Danger of suffocation or
toxication
Adequate ventilation is
essential, especially when another
appliance which also uses the room air
(e.g. gas, oil or coal fired heater,
continuous flow or other water heater) is
installed in the same or an adjacent
room. Allow sufficient room ventilation
by unlockable ventilation openings in
the wall.
Check with your building inspector for a
riskless use to avoid a low pressure of
4 Pa or more.
~
Never connect an exhaust duct to
an active chimney, vent flue or room
venting ductwork. Danger of toxication
by draw back of exhaust fumes.
~
When installing multiple dryers to
one collective exhaust duct, a
non-return flap per dryer must be
installed directly to the collective duct.
Otherwise the dryers could be
damaged and the electrical safety
affected.
~
Keep the area where the dryer is
installed free from lint, dust and dirt.
~
Do not install the machine in rooms
where temperatures below freezing
may occur.
, WARNING - Risk of Fire
~
To reduce the risk of severe injury or
death, follow all installation instructions.
~
Clothes dryer installation must be
performed by a qualified installer.
IMPORTANT SAFETY INSTRUCTIONS
4