Standby
To save energy, the display goes out
after 10 minutes and the indicator
light for the
Start
button flashes
slowly.
The display is switched on again by
moving the programme selector or
touching one of the buttons, without any
effect on any programme that is
running.
– On
Standby comes on:
. . . if a programme is not selected.
. . . after the
Start
button has been
pressed in a programme that is
running.
. . . after the end of a programme.
– Not in current prog.
(default setting)
Standby is activated if no
programme selection is made after
the end of a programme - but not
during a programme that is running.
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The bars show you the setting.
– from 0-18 mins.
– Factory default: 0 mins (normal
cooling down period)
The programme duration will increase
accordingly.
You cannot extend the cooling down
time for the
Warm air, Cool air,
Woollens handcare or Smoothing
programmes.
Drying levels
Cottons
Please note: Changing the settings for
drying levels in the Settings menu will
also affect the
Cottons
t
programme.
Minimum iron
You can alter the drying levels for the
Cottons
and
Minimum iron
programmes.
The bars show you the setting.
– from drier to
– damper
– Factory default: level 4
Machine iron
The drying level
Machine iron
can be
altered separately in the
Cottons
programme.
The bars show you the setting.
– from drier to
– damper
– Factory default: medium.
Settings menu
59