Miele PG 8081i Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 80

background image

~

Before connecting the machine,

check that the connection data on the
data plate (voltage, frequency and fuse
rating) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.

~

There must be no electrical sockets

behind the machine. Danger of
overheating if the machine were to be
pushed up against a plug. See
"Electrical Connection".

~

Do not connect the machine to the

mains electricity supply by a
multi-socket adapter or an extension
lead. These do not guarantee the
required safety of the machine (e.g.
danger of overheating).

~

The machine must not be installed

under a hob. The high radiant
temperatures which are sometimes
generated by a hob could damage the
commercial dishwasher. For the same
reason it should not be installed next to
open fires or other appliances which
give off heat, such as heaters etc.

~

Do not open the housing of the

machine. Tampering with electrical
connections or components and
mechanical parts is highly dangerous
to the user and can cause operational
faults.

~

The machine must not be used if the

electrical connection cable is
damaged. If the cable is damaged it
must be replaced with a special cable
available from Miele. For safety reasons
this must only be done by the Miele
Service Department or an authorised
Miele Service Dealer.

~

The machine must be disconnected

from the mains electricity supply before
any maintenance or repair work is
carried out. Do not reconnect it until the
maintenance or repair work has been
successfully completed.

~

The plastic housing of the water

connection contains an electrical
component. The housing must not be
dipped in water.

~

There are electrical wires in the

water inlet hose. Never cut the water
inlet hose, even if it is too long.

~

The integrated Waterproof System

offers protection from water damage,
provided the following conditions are
met:

– The machine is correctly installed

and plumbed in.

– The machine is properly maintained

and parts are replaced where it can
be seen that this is necessary.

– The stopcock is turned off when the

machine is not used for a longer
period of time (e.g. during holidays).

~

The Waterproof system will work

even if the machine is switched off.
However, the machine must remain
connected to the electricity supply.

Warning and Safety instructions

10

«
...
8
9
10
11
12
...
»

Содержание PG 8081i

















































































Отзывы:

Нет отзывов

Похожие инструкции для PG 8081i

Бренд: ECG Страницы: 188

Бренд: Black+Decker Страницы: 36

Бренд: Asko Страницы: 24

Бренд: Mach Страницы: 45

Бренд: Proline Страницы: 65

Бренд: Maytag Страницы: 52

FAV6800A Series

Бренд: Maytag Страницы: 13

Бренд: Smeg Страницы: 42

EVO CONCEPT CO-502

Бренд: Fagor Страницы: 68

Бренд: Candy Страницы: 41

Бренд: Miele Страницы: 112

Бренд: Miele Страницы: 36

WSD 323 Selection

Бренд: Miele Страницы: 84

WS 5425 MC 7 Professional

Бренд: Miele Страницы: 48

Бренд: Miele Страницы: 116

Бренд: Miele Страницы: 52

Бренд: Miele Страницы: 32

Бренд: Miele Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды