Miele PDR 507 EL Marine, Инструкции по эксплуатации и монтажу

Страница: 51 / 80

Problem solving guide
51
The drying cycle duration is very long
Problem Cause and remedy
The drying process
goes on too long or
even switches off.* In some circumstances, you may be asked to clean
the air channels/filters.

Check for all of the possible causes described be-
low.
Detergent residues, hair and fine fluff can clog the fil-
ters.
 Clean the fluff filter (see “Cleaning and care”).
 Clean the air supply area.

You can remove the cover in the loading area to
clean the air supply area underneath.
The ducting or its openings are clogged with hair or
fluff, for example.

Check and clean all components in the ducting
(e.g. wall pipe, external grille, bends, elbows, etc.).
The air supply situation is not adequate in small, un-
ventilated rooms.
 While drying, open the door or window for ventila-
tion.
The laundry is too damp.

Spin using a higher spin speed in the washing ma-
chine.
The drum is too full.

Do not exceed the maximum load for the pro-
gramme selected.
Metallic components, e.g. zippers, have prevented
the tumble dryer from registering the correct moisture
level.

Open any zips next time.

If the problem recurs, dry these items using the
Timed drying warm air programme.
* Switch the tumble dryer off; wait a short while before starting a new programme.