en - Using the machine
44
Initial commissioning
Before carrying out initial commissioning, it is important to check that
the air purifier is installed in accordance with appropriate use
guidelines. After installation, allow the air purifier to adjust to room
temperature.
Check the air purifier, the plug and the mains connection cable for
damage. If there is any damage, the air purifier must not be used.
Check the fuse rating of the socket before connecting the plug.
Operating the air purifier
The control panel for controlling the air purifier is located behind the
lockable access flap on the front of the plinth.
Check that the mains connection cable and the plug are intact.
Insert the plug into the socket.
Open the lockable access flap on the plinth of the air purifier and
wait for the controls to complete the self-test.
After the self-test, the
Mode
menu appears.
Mode
Use previous setting
Manual mode
time mode
In the
Mode
menu, the operating mode can be selected using the
and
buttons. You can use the previous setting (in the factory de-
fault settings, the previous setting is
Manual mode
) or select a differ-
ent operating mode. To confirm the selected operating mode, hold
down the
and
buttons for at least 3 seconds.
Depending on which operating mode you select, further selectable
options (e.g. flow, clock control, room size) may be displayed. You
can select these options or skip past them by pressing the
and
buttons briefly at the same time. The appliance will then switch to
the
Ready for operation
operating status.
When the appliance is ready for operation, it can be switched on via
the
button. If an operating mode with clock (timer) is selected, the
appliance will switch on automatically at the set time.
If you do not select a menu option within 60 seconds, the previous
setting will be adopted automatically and the appliance will switch to
the
Ready for operation
operating status.
After this step, the operating mode can only be changed in the
Set-
tings
menu.
Further selectable options relating to the operating modes may be
available in the
Settings
menu.
Tip:
The previous setting can be selected more quickly in the
Mode
menu by simply pressing the
button or by pressing the
and
buttons briefly at the same time.
Содержание PAC 1045
Страница 2: ...2 de 4 en 37 fr 70 it 104 nl 139 ...