Miele MM 50-175, Руководство по эксплуатации

Страница: 5 / 28

Using accessories
Accessory parts may only be fitted when
expressly approved by Miele. If other
parts are used, guarantee, performance and
product liability claims may be invalidated.
Notes on the use of this machine
This ironer must be operated at all times
in accordance with the legal
requirements of the Health and Safety Acts.
Persons with especially slim fingers
should only work at the receiving side
and not at the feed-in.
When working with the ironer, always
wear close fitting clothes and keep long
hair tied back. Long hair, wide sleeves,
apron straps, scarves and ties etc. could be
taken in by the roller.
Remove rings and bracelets before
ironing.
Smooth out folds as far away from the
feed-in on the feed-in table as possible.
Feed pillow cases and duvet covers into the
ironer with the open end first. Do not take
hold of the corners from the inside. Do not
take hold of vest straps or apron straps etc.
from the inside.
Check daily that safety devices are
functioning correctly. This way you will
avoid the danger of burns, squashed fingers
and even loss of hands.
Check daily that safety devices are
functioning correctly.
Make sure that safety features cannot be
bridged.
Before switching to reverse make sure
that nobody is endangered.
Lubricate machine parts only when the
machine is shut off.
All personnel working with this machine
must be fully trained in all aspects of its
use and safety.
Keep these instructions in a safe and
accessible place.
Warning and safety instructions
M.-Nr. 05 567 240 /03 5