Installation
20
Draw a line on both sides of the
housing unit 420 mm above the floor
of the housing unit to mark the
distance between the bottom of the
housing unit and the lower edge of
the spacer.
Position the lower edge of the spacer
on this line and align the stopper at
the front of the spacer with the front
of the housing unit side wall.
To secure the spacers and hooks,
place a screw in one of the front two
holes and another in the middle of the
long hole at the back.
The long hole allows for adjustment if
necessary, and the two additional
holes are in case additional screws
are required.
Slide the microwave oven into the
housing unit. Feed the cable with the
plug through the back of the unit.
Secure the appliance at the front by
lifting it over the hooks and lowering
it into position.
Check that the appliance is secure by
pushing lightly on the upper edge of
the front frame.
Check that it is correctly aligned.
Connect the microwave oven to the
electricity supply.
