Miele KWTN 14826 SDE ed Скачать руководство пользователя страница 46

Страница: 46 / 76

. . . "

" appears in the temperature

display.

The demonstration function is activated.

Call the Service Department.

. . . you cannot switch the ice cube
maker on.

Check whether the appliance is
connected to the electricity supply.

. . . the ice cube maker is not
producing any ice cubes.

Was the water inlet pipe purged of air
by a qualified and competent person
before the appliance was used for
the first time?

Check whether the ice cube maker is
switched on.

Check whether the freezer section is
switched on.

Check whether the water inlet is
open.

Check that the ice cube drawer has
been closed properly.
It can take up to 24 hours to produce
the first ice cubes.

. . . the ice cube maker is only
producing small ice cubes.

The size of ice cubes which are
produced over a certain period of time
will depend on the water pressure
present.

If the ice cube maker is only producing
small cubes of ice this means that the
water pressure is low.

Lengthen the water intake time for the
ice cube maker (see "Making ice
cubes").

. . . the indicator light on the ice cube
maker is flashing.

There is a fault. Call the Service
Department.

. . . you cannot switch the appliance
off.

The safety lock has been activated.

. . . the interior lighting is not
working.

Was the door left open for too long?
The lighting switches itself off
automatically after approx. 15
minutes if the door is left open.

If this is not the case, then the interior
lighting is defective.

Call the Service Department.

The LED lighting may only be repaired
or changed by a service technician.
Danger of injury and damage.

Should the cover be damaged or
need to be removed due to damage,

exercise caution.

Never look at the

lighting with optical instruments
(magnifying glass or similar).

Problem solving guide

Содержание KWTN 14826 SDE ed













































































Результаты поиска

Содержание KWTN 14826 SDE ed

Отзывы:

Похожие инструкции для KWTN 14826 SDE ed

Бренды по названию

Популярные бренды

Miele KWTN 14826 SDE ed, Руководство по эксплуатации и установке

Результаты поиска

Содержание KWTN 14826 SDE ed

Отзывы:

Похожие инструкции для KWTN 14826 SDE ed

Бренды по названию

Популярные бренды