manualshive.com logo in svg

Miele KWT 6834 SGS, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KWT 6834 SGS Скачать руководство пользователя страница 38

SommelierSet

38

Setting up the SommelierSet

The SommelierSet can be used to have
your wine ready for drinking. You can
store wine glasses and accessories in
the appliance, decant your wine and
store open bottles in the appliance.

The glassware holder 

 and the bottle

holder with the accessory box 

 can

be used either in the middle or lower
wine conditioning zone. It is important
to use a shelf which pulls out fully (the
second and third shelves in the middle
and lower zones pull out fully).

The two wooden shelves above must
be removed:

Pull the wooden shelf out until it
stops, then lift it up and off the run-
ners. Hold onto the frame to do this.

Fitting the runner covers

Place the four covers supplied 

over the runners which are now vis-
ible with the thicker side of the cover
pointing forwards.

Inserting the glassware holder

This can be used for storing and chilling
wine glasses.

To fit glassware holder 

 remove the

necessary number of slats and place
the holder 

 on the wooden shelf.

The wine decanter can be placed in the
middle of the shelf, and stored there if
you wish.

Содержание KWT 6834 SGS













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды