manualshive.com logo in svg

Miele KWT 6834 SGS, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KWT 6834 SGS Скачать руководство пользователя страница 33

Feature lighting

33

Touch the OK sensor to confirm your
choice.

The selected brightness is saved and
the temperature reappears in the dis-
play.

As soon as the appliance door is
closed, the set brightness for the fea-
ture lighting takes effect. When the ap-
pliance door is opened, the interior
lighting returns to its normal level.

Lighting duration of the feature light-
ing

The lighting duration for the feature
lighting is set to 30 minutes as stand-
ard.
The lighting duration can be set to 30,
60, 90 minutes up to 00 (unlimited). The
feature lighting will have the brightness
setting you have selected previously.

Open the appliance door.

Touch the On/Off sensor for the fea-
ture lighting so that it is highlighted in
yellow.

Touch the sensor for the feature light-
ing again for approx. two seconds
until 

 flashes in the display.

Use the 

 and 

 sensors for altering

the temperature to set the feature
lighting duration.
The duration (in minutes) will flash in
the display.

By touching the sensor

– lighting duration is reduced by 30

minutes

– lighting duration is increased by 30

minutes.

Touch the OK sensor to confirm your
choice.

The selected lighting duration is saved
and the temperature reappears in the
display.

The lighting duration set starts anew
whenever the appliance door is opened
and closed.

Caution. Laser beam class 1M

Do not remove the lighting covers.
Should the covers be damaged or
need to be removed due to damage,
do not use optical instruments (mag-
nifying glass or similar) to look at the
lighting.

Содержание KWT 6834 SGS













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды