Miele KWT 4154 UG-1, Руководство по эксплуатации и установке

Страница: 20 / 36

To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
Never use cleaning agents
containing abrasive substances
such as sand, soda (sodium
carbonate), acids or chemical
solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matte areas to appear.
Make sure that water cannot get into
the electronic unit or into the
lighting.
Do not let water get into the
drainage channel or drain hole when
cleaning.
Do not use steam cleaning
equipment to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information that will be
required in the event of a Service
call.
Before cleaning
^
Unplug the appliance from the
socket.
^
Take out any removable parts, e.g.
shelves, for cleaning.
Cleaning the interior, door and
accessories
Use a mild solution of warm water and
liquid dish soap. All accessories and
shelves should be hand-washed only.
^
Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar
item to clear the drain if necessary.
^
After washing, wipe down the interior
and accessories with a clean wet
cloth, then dry with a soft cloth.
Leave the appliance doors open for a
short time, so the moisture can
evaporate Clean the appliance door
with a proprietary glass cleaner.
Ventilation slits
^
The ventilation slits should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Cleaning and care
20