Changing the door hinging
The appliance is supplied right hand
hinged. If left hand door hinging is re-
quired follow the instructions below.
Open the lower appliance door and
remove cover
b
.
Close the lower appliance door, un-
screw lower hinge bracket
c
, and
take the door off.
Take the washers and hinge pin
d
out of the hinge bracket, then refit
them in the second hole in the hinge
bracket.
(Use the spanner supplied to un-
screw and refit the hinge pin).
With the upper door closed, unscrew
upper hinge bracket
e
then take the
upper door
f
off.
Take plug
b
out of the door bearing,
and refit on the opposite side.
Unscrew bearing block
d
, turn it
around and refit it on the opposite
side.
Use the spanner supplied to un-
screw the hinge pin
c
out of bearing
block
d
and refit it into the bearing
block from below.
Remove plugs
e
and cover
f
. Refit
the plugs on the opposite side, and
cover the screw head on the oppo-
site side with the cover.
Fit door handles
g
and plugs
h
on
the opposite side.
Hang the upper appliance door on
hinge pin
c
, and close the ap-
pliance door.
Changing the door hinging
31