Switching on and off
Before using for the first time
The stainless steel surface has a pro-
tective cover to prevent scratching dur-
ing transportation.
Do not remove this cover until the ap-
pliance has been installed or built in.
Start at one of the upper corners.
Clean the inside of the appliance
and the accessories with luke warm
water and a little washing up liquid
and then dry using a soft cloth.
Important:
To ensure correct functioning of the
appliance let it stand for between
1/2 and 1 hour after transporting it
to its final location before connect-
ing it to the mains.
Switching on
Turn the temperature selector in a
clockwise direction away from “0”.
The appliance will begin to cool. The in-
terior light in the refrigerator section will
come on when the door is opened.
Switching off
Turn the temperature selector in an
anti-clockwise direction from “1”
back to the “0” position.
The cooling system and the interior
light are now switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday
switch the appliance off at the mains,
withdraw the plug (pull on the plug
and not the cable),
defrost the freezer section,
clean the appliance, and
leave the doors ajar to air the ap-
pliance.
If, during a long absence, the ap-
pliance is switched off but not
cleaned out and the doors are left
shut there is a danger of mould and
odours building up inside the ap-
pliance.
Switching on and off
10
