manualshive.com logo in svg

Miele KMDA 7774, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KMDA 7774 Скачать руководство пользователя страница 51

Cleaning and care

51

Cleaning the extraction grille and the
grease filter by hand.

Clean the extraction grille and the
grease filter with a soft nylon brush in
a mild solution of hot water and a
little washing-up liquid. Do not use
concentrated washing-up liquid.

Cleaning the extraction grille and the
grease filter in the dishwasher

Place the extraction grille upright in
the lower basket.

Place the grease filter with the filter
base at the top in lower basket.
Ensure the spray arm is not
obstructed.

Use a proprietary household
dishwasher detergent.

Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.

Depending on the dishwasher
detergent used, cleaning the filter in a
dishwasher can cause permanent
discolouration to internal surfaces of
the filter. However, this will not affect
the functioning of the filter in any way.

Internal surfaces of the cooker
hood

Whilst the grease filter is removed
remove any grease deposits from all
accessible areas of the housing
Doing so will prevent a fire hazard.

Resetting the grease filter
operating hours counter

After cleaning the grease filter, the
operating hours counter needs to be
reset.

Touch the 

 sensor for 3 seconds.

The sensor will go out.

Reactivating charcoal filter

The charcoal filter needs to be
reactivated after 120 operating hours.
The 

 sensor will light up.

Reactivate the charcoal filter as
described in the operating
instructions supplied with the
recirculation box.

Resetting the charcoal filter
operating hours counter

Touch the 

 sensor for 3 seconds.

The sensor will go out.

Содержание KMDA 7774





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды