manualshive.com logo in svg

Miele KM 7678 FL, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 7678 FL Скачать руководство пользователя страница 52

Problem solving guide

52

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.

The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

Messages in the display

Problem

Cause and remedy



 is flashing altern-

ately with 



 in the timer

display and the buzzer
is sounding.

The hob is incorrectly connected.

Disconnect the hob from the mains electricity sup-
ply.

Contact the Customer Service Department. The
hob must be connected to the mains according to
the wiring diagram.

After the hob has been
switched on, or after
touching a sensor, 



appears in the timer
display for a few
seconds.

The system lock or safety lock is activated.

Deactivate the system lock or safety lock (see
“System lock / Safety lock”).

After the hob has been
switched on, 



 appears

briefly in the timer dis-
play. The hob does not
heat.

The hob is in demonstration mode.

Touch the 0 sensor control on any of the numerical
displays.

Then touch the 

 and 

 sensor controls at the

same time until 



 flashes alternately with 



 in

the timer display.

The hob has switched
off automatically. When
the element is switched
back on, 

 appears

above the On/Off
sensor control 

.

One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.

Clean off any dirt and/or remove the object (see
“Safety features” – “Safety switch-off”).



 will flash alternately

with 



 in the timer

display.

The overheating protection mechanism has been ac-
tivated.

See “Safety features – Overheating protection”.

Содержание KM 7678 FL





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды