Miele KM 7200 FR Скачать руководство пользователя страница 52

Страница: 52 / 72

Problem solving guide

Problem

Cause and remedy

The sensors show
increased sensitivity or
fail to react.

The sensitivity level of the sensors has changed.



Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the hob.
The area surrounding the hob must not be too
dark.



Make sure that there is nothing covering the
sensors or the hob.
Take any pans off the hob and wipe away any food
deposits.



Interrupt the power supply to the hob for approx.
1 minute.



If the problem persists after power has been
restored, please contact Miele.

In the timer
display



flashes

alternately with
numbers.



The overheating protection mechanism has been
activated.



See “Overheating protection” in the “Safety
features” chapter.







The fan is blocked or defective.



Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.



If this fault code continues to appear in the
display, contact Miele Service.



and other numbers

There is a fault in the electronic module.



Interrupt the power supply to the hob for approx.
1 minute.



If the problem persists after power has been
restored, please contact Miele Service.

Содержание KM 7200 FR









































































Результаты поиска

Содержание KM 7200 FR

Отзывы:

Похожие инструкции для KM 7200 FR

Бренды по названию

Популярные бренды

Miele KM 7200 FR, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 7200 FR

Отзывы:

Похожие инструкции для KM 7200 FR

Бренды по названию

Популярные бренды