manualshive.com logo in svg

Miele KM 6388, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 6388 Скачать руководство пользователя страница 38

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Safety features

37

Overheating protection

All the induction coils and cooling ele-
ments for the electronics are fitted with
an overheating protection mechanism.
Before the induction coils or cooling
elements get too hot, the overheating
protection mechanism cuts in in one of
the following ways:

Induction coils

– Any booster function in operation will

be switched off.

– The set power level will be reduced.

– The cooking zone turns off automat-

ically. 



 flashes in the timer display

alternating with 



.

You can use the cooking zones again as
usual when the fault message has gone
out.

Cooling elements

– Any booster function in operation will

be turned off.

– The set power level will be reduced.

– The cooking zones turn off automat-

ically.

The affected cooking zones can only be
used again if the cooling element has
cooled down to a safe level.

The overheating protection mechanism
can be triggered by:

– Heating up an empty pan.

– Fat or oil being heated on a high

power level.

– Insufficient ventilation to the under-

side of the hob.

– A hot cooking zone being switched

on after an interruption to the power
supply.

If, despite removing the cause, the
overheating protection mechanism trig-
gers again, contact Miele Service.

Содержание KM 6388






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды