manualshive.com logo in svg

Miele KM 6388, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 6388 Скачать руководство пользователя страница 31

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Timer

30

The hob has to be switched on if you
wish to use the timer.
You can set a time between 1 minute
(



) and 9 hours (

.

).

The timer can be used for two different
functions:

– to set the minute minder

– to set a cooking zone to switch off

automatically.

A time up to 99 minutes can be set and
displayed in minutes.

To set a time of more than 99 minutes,
the timer must be switched to hours (h).
The time is set in half-hour steps. Half-
hours are indicated by a dot following
the number, for example, 2 h 30 min:

h

Minute minder

Setting the minutes

Example: You want to set a time of 15
minutes.

Make sure the hob is switched on.

Touch the 

 sensor.

The 

 sensor flashes. 



 appears in

the timer display, and the right 

flashes.

Enter the tens first and then the units.

Touch the number sensor which cor-
responds to the tens position (1 in
this case).

The timer display will change and 

 will

start flashing on the right hand side.

Touch the number sensor which cor-
responds to the units position (5 in
this case).

The timer display will change. The 

moves to the left and 

 appears on the

right.

After several seconds, the 

 sensor

and the timer display will light up con-
stantly. The timer starts to count down.

Содержание KM 6388






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды