manualshive.com logo in svg

Miele KM 6366-1, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 6366-1 Скачать руководство пользователя страница 61

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Electrical connection

60

Disconnecting from the mains

Risk of electric shock.

There is a risk of electric shock if the
hob is connected to the mains sup-
ply during repair or service work.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.

To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:

Safety fuses

Completely remove fuses.

Automatic circuit breakers

Press the (red) test button until the
middle (black) button springs out.

Built-in circuit breakers

Circuit breakers at least type B or C:
Switch the lever from 1 (on) to 0 (off).

Residual current device (RCD)

Switch the main switch from 1 (on) to
0 (off) or press the test button.

Mains connection cable

The hob must be connected to the elec-
trical supply with a special connection
cable, type H 05 VV-F (PVC insulated)
with a suitable diameter.

Please see wiring diagram for connec-
tion. (N.B. This appliance is supplied
single phase only in the UK / AUS / NZ).

See the data plate on the hob for the
correct voltage and frequency.

Replacing the mains cable

Danger of electric shock.

The mains connection cable must be
replaced by a suitably qualified and
competent person in accordance
with current local and national safety
regulations. (e.g. BS 7671 in the UK).
The earth lead must be connected to
the point marked 

.

If the mains cable needs to be replaced
it must be replaced with a special con-
nection cable, type H 05 VV-F (PVC-in-
sulated), available from Miele.

The connection data is quoted on the
data plate.

Содержание KM 6366-1






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды