Miele KM 6366-1 Скачать руководство пользователя страница 43

Страница: 43 / 69

Imp

ort

plia

nce

s.c

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Problem solving guide

Problem

Cause and remedy

The



symbol appears

in one or more cooking
zone displays and the
hob switches off auto-
matically.

One or more of the sensors are covered, e.g. by finger
contact, food boiling over or an object.



Clean off any dirt or remove the object (see
“Safety switch-off”).

A cooking zone
switches off automatic-
ally.

It has been operated for too long.



You can use the cooking zone again by switching
it back on (see “Safety switch-off”).

A cooking zone
switches off automatic-
ally.

The overheating protection mechanism has been ac-
tivated.



See “Overheating protection”.

The Booster has deac-
tivated early automatic-
ally.

The overheating protection mechanism has been ac-
tivated.



See “Overheating protection”.

The cooking zone is not
working in the usual
way on the power set-
ting selected.

The overheating protection mechanism has been ac-
tivated.



See “Overheating protection”.

Power level 9 is auto-
matically reduced if you
select power level 9 on
two linked cooking
zones at the same time.

Operating both zones at power level 9 would exceed
the permitted maximum power for the two zones.



Use a different cooking zone.

The food in the pan
does not heat up when
the Auto heat-up func-
tion is switched on.

A large amount of food is being heated up.



Start cooking at the highest power level and then
turn down to a lower one manually later on.

The pan is not conducting heat properly.



Use a different pot or pan which conducts heat
properly.

An operating noise can
be heard after the appli-
ance has been switched
off.

The cooling fan runs until the hob has cooled down
and then switches off automatically.



and numbers are

flashing in the cooking
zone displays and a
tone sounds.

The hob is incorrectly connected.



Contact Miele. The hob must be connected to the
mains according to the wiring diagram.

Содержание KM 6366-1






































































Результаты поиска

Содержание KM 6366-1

Отзывы:

Бренды по названию

Популярные бренды

Miele KM 6366-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 6366-1

Отзывы:

Бренды по названию

Популярные бренды