
You can change the default settings of the programme
options (see chart). Several settings can be altered in
succession.
After the programming mode has been called up,
P
(Programme) and
S
(Status) will appear in the timer display.
On hobs with 3 cooking zones, an additional indicator will
appear at the rear left.
The programme is shown in the numerical keypad displays at
the front left and rear left. Example:
Programme 3 = front left
3
, rear left
0
Programme 14 = front left
4
, rear left
1
The status is shown in the numerical keypad display at the
front right.
Once you have left the programming mode, the hob will be
reset automatically. This is completed when an indicator
above the
s
sensor lights up briefly.
Do not switch the hob on again until the reset process is
completed.
To call up the programming mode
^
With the hob switched off, touch the
s
and
$
sensors
at
the same time
until the safety lock indicator lamp flashes.
To set the programme setting
^
To set the
units position
touch the relevant number on the
front left
numerical keypad.
^
To set the
tens position
touch the relevant number on the
rear left
numerical keypad.
To set the status setting
^
Touch the appropriate number on the
front right
numerical
keypad.
To save settings
^
Touch the
s
sensor until all the displays go out.
To not save settings
^
Touch the
$
sensor until all the displays go out.
Programming
47
Содержание KM 6350
