Miele KM 456, Руководство по эксплуатации

Страница: 33 / 40

Installation work and repairs to
electrical components of this
appliance must only be carried out
by a suitably qualified and
competent person in accordance
with local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if . . .
... the hob or cooking zones cannot
be switched on
Check whether:
– the safety lock is activated.
If necessary, deactivate it (see
"Safety lock").
– a non-metallic pan has been placed
on the cooking zone when pan
recognition is switched on (see "Pan
recognition).
– the mains fuse has blown.
If none of the above is the case, then
disconnect the appliance from the
electricity supply for approx. 1 minute.
To do this:
– switch off at the isolator, or
– withdraw the mains fuse.
Reconnect to the mains supply and
switch the appliance on. If it still does
not heat up, contact a qualified
electrician or the Miele Service
Department.
... a ß is flashing alternately with the
0 symbol or a power setting
The cooking zone has been switched
on without a pan in place, or the pan is
unsuitable (see "Pan recognition").
... the residual heat indicators are
flashing in the displays of the
cooking zones which have been
switched on most recently
There was an interruption to the power
supply during operation. The hob has
switched itself off.
You can use the hob again as normal.
Check the cooking stage of the food
and whether its condition has been
affected by the power failure before
switching the cooking zone(s) back on
again.
Problem solving guide
33