Miele KFN 9758 iD-3 Скачать руководство пользователя страница 55

Страница: 55 / 68

Undo ball joint

using a spanner

and remove it.

Stand the appliance doors up one by
one, and slacken the hinges at the
front (the hinges remain open).

Remove caps

from the top and

bottom of each door (if the caps are
not in place, they will have been
supplied separately with the
appliance).

Remove screws

from all of the

hinges, and refit each hinge in its
diagonally opposite corner.

Do not

close up the hinges. Danger

of injury.

Use a powered screwdriver to secure
the hinges; screws

are

self-tapping.

Replace caps

in the vacant holes

on the opposite side.

To secure the soft-close mechanism

Place the two doors with the outer
side downwards on a stable surface.

Screw ball joint

of soft-close

mechanism

into the new fixing

holes.

Push tension spring

inwards

again.

Screw mounting

onto the hinge

and tighten securely.

Open out soft-close mechanism

and hook it onto ball joint

Changing the door hinging

Содержание KFN 9758 iD-3





































































Результаты поиска

Содержание KFN 9758 iD-3

Отзывы:

Похожие инструкции для KFN 9758 iD-3

Бренды по названию

Популярные бренды

Miele KFN 9758 iD-3, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 9758 iD-3

Отзывы:

Похожие инструкции для KFN 9758 iD-3

Бренды по названию

Популярные бренды