![background image](http://html.mh-extra.com/html/miele/kfn-9758-id-3/kfn-9758-id-3_operating-and-installation-instructions_236588044.webp)
. . . the compressor is switching on
too frequently and for too long.
^
Check whether the ventilation gaps in
the plinth at the bottom and in the
housing unit at the top have been
covered over or become too dusty.
^
The doors have been opened too
frequently, or a large amount of fresh
food has been put in at once for
freezing.
^
Check that the doors close properly.
. . . the compressor runs
continuously.
To save energy, the compressor runs at
a lower speed when less cooling is
required. In this case, the motor runs
for longer.
. . . the frozen food is thawing
because the freezer is too warm.
^
Is the room temperature lower than
the ambient temperature for which
the appliance is designed?
If so, raise the temperature of the
room.
Operating in a room which is too cold
will cause the cooling system to switch
off for too long, causing the freezer to
become too warm.
. . . food has frozen together.
Use a blunt instrument, e.g. a spoon
handle or plastic scraper, to prise it
apart carefully.
. . . the alarm sounds.
Has the appliance door been open for
longer than 60 seconds?
^
Close the appliance door.
. . . the alarm sounds and the freezer
section temperature display flashes.
The temperature in the freezer section
has risen above the set temperature
because
^
the door has been opened too
frequently, or large amounts of fresh
food have been placed in the
appliance at once.
The alarm will stop and the temperature
display will light up constantly again as
soon as the temperature has dropped
down to the correct level again.
. . . bars light up or flash in the
temperature displays.
Check the temperature displays about
6 hours after switching on the
appliance. Only temperatures within the
range the appliance can display will be
shown.
. . . one of the fault codes "
F0
" to
"
F5
" appears in one of the
temperature displays.
There is a fault. Call Miele.
. . . the SuperFreeze indicator light
and the temperature display are both
flashing at the same time.
There is a fault. Call Miele.
Problem solving guide . . ?
44
Содержание KFN 9758 iD-3
Страница 52: ...Freezer section height Niche height A B KFN 9758 iD 3 695 1772 1788 Building in dimensions 52 ...
Страница 66: ...66 ...
Страница 67: ...67 ...
Страница 68: ...Alteration rights reserved 4810 KFN 9758 iD 3 M Nr 09 029 500 00 ...