Miele KFN 37452 iDE Скачать руководство пользователя

Страница: 9 / 116

Warning and Safety instructions



For safety reasons, this appliance may only be used after it has

been built in.



The appliance must be isolated from the electricity supply during

installation, maintenance and repair work.



Unauthorised installation, maintenance and repairs can cause

considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.



While the appliance is under warranty, repairs should only be

undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.



Please note the following advice for ice cube production:

– Only use cold, fresh tap water to fill the water container. Hot water

and other liquids could damage the water container or the ice
cube maker.

– Change the water in the water container regularly (if not used for

more than 24 h) and always empty and refill it before switching on
the ice cube maker to ensure that the ice cubes are made with
fresh water. This will prevent bacteria from building up.

– Do not use water from a reverse osmosis unit in this appliance.

This could damage the refrigeration appliance.



Miele can only guarantee the safety of the appliance when

genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.

Содержание KFN 37452 iDE





















































































































Результаты поиска

Содержание KFN 37452 iDE

Отзывы:

Похожие инструкции для KFN 37452 iDE

Бренды по названию

Популярные бренды

Miele KFN 37452 iDE, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 37452 iDE

Отзывы:

Похожие инструкции для KFN 37452 iDE

Бренды по названию

Популярные бренды