Changing the door hinging
93
Remove cover
and refit on the op-
posite side.
Secure hinge plate
on the opposite
side, starting with screw
in the
middle at the bottom.
Then screw in the other two
screws
.
Insert hinge pin
complete with
washer and adjusting foot.
Important. The lug on the hinge pin
must be pointing backwards again.
Changing the middle hinge
plate over
Pull off cover
.
Unscrew hinge plate
with the pro-
tective film underneath.
Turn hinge plate
through 180° and
screw it with the protective film into
position on the opposite side.
The protective film protects the appli-
ance housing from damage.
Turn grey plastic cover
through
180° and refit it in hinge plate
.
Tip:
Plastic cover
fits over the pro-
truding bearing bush so that this is
covered from underneath and from the
side.
Turn cover
through 180° and refit it
on the opposite side.
Содержание KFN 29233 D bb
Страница 101: ......
Страница 102: ......
Страница 104: ...M Nr 10 360 950 01 en GB IE ZA KFN 29233 D bb ...