manualshive.com logo in svg

Miele KFN 15943 D edt/cs, Инструкции по эксплуатации и монтажу, Страница: 82 / 88

Поделиться
Скачать
Miele KFN 15943 D edt/cs Скачать руководство пользователя страница 82

Changing the door hinges

82

Inserting the upper soft-close
mechanism

Remove the cover 

 from the

panel 

, turn it 180°, and reinsert it

on the other side.

Hook the spacer into the latch (A) on
the handle side.

Hook the soft-close mechanism into
the latch (B) on the machine side.

Push both parts out so that they are
firmly engaged.

Use the screw 

 to secure the

spacer and soft-close mechanism in
place.

Attach the panel 

 onto the soft-

close mechanism bracket 

.

Slide the cover 

 on from the side so

that the openings for the pin 

 are

aligned.

Pull the soft-close mechanism
bracket 

 toward the hinge plate and

insert the pin 

 from above so that

the square sits in the depression.

Snap the cover 

 completely in

place.

Make sure that the cover 

 fits properly

so that the door can be closed without
hindrance and the pin is secured.

Remove the safety device 

.

Содержание KFN 15943 D edt/cs

























































































Отзывы:

Нет отзывов