Miele KFN 15943 D edt/cs страница 33 Скачать руководство пользователя

Страница: 33 / 88

Selecting additional settings

Setting the display brightness

You can adjust the brightness of the
display to suit the ambient light condi-
tions in the room.

The brightness can be adjusted in
stages from



(lighting off) to



(maxi-

mum brightness). The brightness is set
to



at the factory.



Touch the



SuperFrost button to the

right-hand side of the display for ap-
prox. 5 seconds.

MENU lights up on the display and



flashes.
Settings mode has now been activated.



Touch one of the sensor buttons for
setting the temperature (



and



) re-

peatedly until



appears on the dis-

play.



Touch the



SuperFrost button to

confirm your selection.

The most recently selected setting will
appear on the display.



By touching one of the sensor but-
tons for setting the temperature (



and



), you can then select the de-

sired level of brightness for the dis-
play. The display will light up at the
level of brightness you just selected.



Touch the



SuperFrost button to

confirm your selection.

MENU lights up on the display and



flashes.



Touch the



On/Off button to exit

Settings mode.

The brightness will now be set to the
new level.

Changing the temperature unit
(°F/°C)

The temperature can be displayed in ei-
ther Fahrenheit (°F) or Celsius (°C).



Touch the



SuperFrost button to the

right-hand side of the display for ap-
prox. 5 seconds.

MENU lights up on the display and



flashes.
Settings mode has now been activated.



Touch one of the sensor buttons for
setting the temperature (



and



) re-

peatedly until



appears on the dis-

play.



Touch the



SuperFrost button to

confirm the selection.

Available settings:

–





: degrees Celsius

–





: degrees Fahrenheit





was previously set,





will now be

offered.





was previously set,





will now be

offered.



Touch the



SuperFrost button to

confirm the setting.

MENU lights up on the display and



flashes.



Touch the



On/Off button to exit

Settings mode.

The desired temperature unit will be set.

Содержание KFN 15943 D edt/cs

























































































Результаты поиска

Содержание KFN 15943 D edt/cs

Отзывы:

Похожие инструкции для KFN 15943 D edt/cs

Бренды по названию

Популярные бренды

Miele KFN 15943 D edt/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 15943 D edt/cs

Отзывы:

Похожие инструкции для KFN 15943 D edt/cs

Бренды по названию

Популярные бренды