Changing the door hinging
72
Push pin
up and out from below
using a flat-headed screwdriver.
Remove cover
.
Now the soft-close mechanism and the
appliance are no longer connected.
Remove panel
.
Push soft-close mechanism
bracket
as far as it will go toward
the handle side.
Loosen screw
in soft-close mech-
anism and spacer.
Lever out the housing together with
the soft-close mechanism using a
flat-headed screwdriver in the middle.
Then, lever the housing together with
the soft-close mechanism out of the
latch from the appliance side.
Put the soft-close mechanism to one
side.
Push the spacer towards the hinge
side and out.
Place the spacer to one side.