Problem solving guide
57
Message
Cause and remedy
The
LED lights up in
the display and a buzzer
is also sounding. The
temperature display for
the freezer section is
flashing.
Indication of an
interruption to the power supply
:
the temperature in the appliance over the last few
days or hours has risen too high because of a power
cut or interruption to the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
Touch the
sensor.
The warmest temperature recorded in the freezer sec-
tion will flash for about 1 minute in the temperature
display for the freezer section.
Touch the
sensor.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer section.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
“
F0
to
F9
” appears in
the display.
There is a fault.
Call Service.
There is an
appliance fault
: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.