Changing the door hinging
82
Replace the panel
onto the soft-
close mechanism from above,
clicking it back into place first at the
bottom and then at the top.
Close the upper door.
Refitting the handle
Risk of damage!
If the handle is fitted incorrectly, the
door seal might get damaged.
Please make sure you follow the
instructions below carefully when
you refit the handle.
To begin with, loosely attach the door
handle to the opposite side with the
two front screws
.
The mounting plate
must be
positioned on the door casing so that
when the door is closed it is flush with
the outer wall of the appliance.
Firmly tighten all 4 screws
.
From the appliance side, slide the
sidebar
into the guide on the
mounting plate until you hear it click
into place.
Make sure that the sidebar
does
not come into contact with the door
seal when the door is opened. This
would cause permanent damage to
the door seal.
Содержание KFN 15842 D ed/cs
Страница 84: ......
Страница 85: ......
Страница 86: ......
Страница 88: ...M Nr 10 738 440 00 en AU NZ KFN 15842 D ed cs KFN 15943 D ed cs ...