manualshive.com logo in svg

Miele KFN 15842 D ed/cs, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 15842 D ed/cs Скачать руководство пользователя страница 57

Problem solving guide

57

Message

Possible cause and remedy

The 

 display LED is lit

up and an alarm is
sounding.

The 

temperature alarm

 has been activated (see

"Temperature and door alarm"). The temperature in
the freezer section has risen higher or fallen lower
than the temperature set.
This could be due to, e.g.

– the freezer door being opened too often, or being

left open.

– a large quantity of food being placed in the freezer

section at once without switching on SuperFreeze.

– an interruption to the power supply.

– a fault with the appliance.

Rectify the cause of the alarm.

The 

 display LED will go out and the alarm will stop.

The temperature display will stop flashing as soon as
the temperature has dropped to the correct level.

Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be re-frozen after it has been cooked.

Содержание KFN 15842 D ed/cs

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды