Miele KFN 14947 SDE ed/cs-1 страница 72 Скачать руководство пользователя

Страница: 72 / 84

Before beginning, make sure that
the door shelves are empty.

Removing the soft-close mechanism
for the upper door

Open the upper door.

Remove panel

from the soft-close

mechanism by inserting a flat-bladed
screwdriver into the gap from above
and easing it off bit by bit.

Take care not to damage the door
seal.
If the door seal is damaged, the
door will not close properly and
cooling will be impaired.

Slide panel

towards the appliance,

and leave it hanging between the
door and the appliance.

Fit restraining clip

(supplied with

the appliance) onto soft-close
mechanism

The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.

Carefully prise open cover

from

above and below using a flat-bladed
screwdriver.

Push hinge pin

up and out from

underneath using a flat-bladed
screwdriver.

Changing the door hinging

Содержание KFN 14947 SDE ed/cs-1





















































































Результаты поиска

Содержание KFN 14947 SDE ed/cs-1

Отзывы:

Похожие инструкции для KFN 14947 SDE ed/cs-1

Бренды по названию

Популярные бренды

Miele KFN 14947 SDE ed/cs-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 14947 SDE ed/cs-1

Отзывы:

Похожие инструкции для KFN 14947 SDE ed/cs-1

Бренды по названию

Популярные бренды