Miele KFN 14947 SDE ed/cs-1 страница 67 Скачать руководство пользователя | Manualshive

Страница: 67 / 84

background image

Do not place any appliance which
gives off heat, such as a toaster,
mini-oven or double burner hob, on
top of this appliance There is the
danger of these catching fire.

This appliance must not be installed
directly next to another refrigerator
or freezer.
It does not have side-wall heating,
so installation next to another
refrigerator or freezer could cause a
build-up of condensation between
them.
Further information is available from
your dealer.

Location

This appliance should be installed in a
dry, well-ventilated room. It should not
be installed where it is exposed to
direct sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator. The room
temperature should not go above or
below the climate range for which the
appliance is designed. The higher the
ambient temperature of the room, the
more energy the appliance requires to
operate.

When installing the appliance please
be aware:

– The socket must be easily accessible

in an emergency, not concealed
behind the appliance.

– The plug and cable must not touch

the rear of the appliance as they
could be damaged by vibrations
from the appliance.

– Do not plug in other appliances

behind this appliance.

Important. In environments with
high humidity

condensation can

build up on the exterior of the
appliance. This can cause corrosion
of the appliance walls. For
prevention, it is advisable to install
the appliance with sufficient
ventilation in a dry and /or
air-conditioned room.
Make sure that the appliance door is
closing and sealing properly, the
ventilation gaps are not covered and
the appliance is installed in
accordance with these installation
instructions.

Climate range

The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.

Climate range

Ambient room

temperature

SN

N

ST

T

+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C

Operating in a room which is too cold
will result in the cooling system
switching off for too long, causing the
internal temperature in the appliance to
rise with the risk of frozen food
deteriorating and going off.

Installation

67

«
...
65
66
67
68
69
...
»

Содержание KFN 14947 SDE ed/cs-1





















































































Отзывы:

Нет отзывов

Похожие инструкции для KFN 14947 SDE ed/cs-1

Бренд: Bauknecht Страницы: 9

U-3045CLRINT-00B

Бренд: U-Line Страницы: 12

Бренд: Gaggenau Страницы: 96

CollMatic HDC225

Бренд: Waeco Страницы: 388

Бренд: Thermador Страницы: 48

Бренд: TCL Страницы: 19

Бренд: baridi Страницы: 4

Бренд: Blueair Страницы: 16

Бренд: KitchenAid Страницы: 12

Бренд: KitchenAid Страницы: 12

Бренд: KitchenAid Страницы: 21

Бренд: KitchenAid Страницы: 21

Бренд: KitchenAid Страницы: 21

Бренд: KitchenAid Страницы: 21

Бренд: KitchenAid Страницы: 21

Бренд: KitchenAid Страницы: 21

Бренд: KitchenAid Страницы: 21

Бренд: KitchenAid Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды