. . . the Super freeze indicator light
does not light up, even though the
appliance is working.
The indicator light is defective. Call the
Service Department.
. . . you cannot switch the appliance
off.
The safety lock has been activated.
. . . "
nA
" appears in the freezer
section temperature display.
The freezer section temperature has
risen too high at some point during the
last couple of days because of a power
cut.
^
Press the alarm off button whilst "
nA
"
is lit up in the display.
The temperature display will show the
warmest temperature recorded in the
freezer section during the power cut.
Depending on the temperature
displayed, you should check the
condition of food in the freezer section.
If it has defrosted or started to defrost,
check that it is still safe to use and if so
use it as soon as possible. Defrosted
food may only be re-frozen after it has
been cooked.
The warmest temperature will show in
the display for about 1 minute. The
display will then revert to showing the
current temperature in the freezer
section.
At the end of a power cut, the
appliance will start operating again at
the last temperature setting selected.
. . . the PerfectFresh compartment
has not closed properly by itself but
remains slightly open.
The self-closing mechanism has
disengaged and is retracted.
^
Using a little force, push the
compartment in as far as it will go.
The self-closing mechanism will now
function correctly and the compartment
will close automatically again.
. . . the interior lighting in the
refrigerator section is not working.
Has the appliance door been left open
for too long? The lighting switches itself
off automatically after approx. 15
minutes if the door is left open.
If it also does not come on when the
door is opened briefly, but the
temperature display is working, then
the lighting is defective.
^
Call the Service Department.
The LED lighting may only be repaired
or replaced by a service technician.
There are live electrical components
under the cover. Danger of injury and
damage.
Do not remove the cover. If the
cover is damaged or needs to be
removed due to damage,
exercise
caution.
There are lasers in the
lighting (laser beam class 1M) which
you should avoid looking at directly.
Do not use optical instruments
(magnifying glass or similar) to look
at the lighting either.
Problem solving guide
46
Содержание KF 9757 iD-3
Страница 53: ...Freezer section height Niche height A B KF 9757 iD 3 KF 9757 iD 4 549 1772 1788 Building in dimensions 53 ...
Страница 66: ...66 ...
Страница 67: ...67 ...
Страница 68: ...Alteration rights reserved 0412 KF 9757 iD 3 KF 9757 iD 4 M Nr 09 308 800 00 ...