Miele KF 7654 SNE ed, Руководство по эксплуатации и установке

Страница: 12 / 48

Before using for the first time
The stainless steel surface has a
protective foil to prevent scratching
during transportation.
^
Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid and then dry
with a soft cloth.
Important:
To ensure correct functioning of the
appliance, let it stand for between ½
and 1 hour after transporting it to its
final location before connecting it to
the mains.
Switching on
The refrigerator and freezer sections
are switched on independently of one
another so that, if required, you can
switch on only one section.
Refrigerator section
^
Press the On/Off button for the
refrigerator section.
A bar will flash in the temperature
display for the refrigerator section. The
refrigerator section will start cooling.
The interior light will come on when the
door is opened.
Freezer section
^
Press the On/Off button for the
freezer section.
Bars will flash in the temperature
display for the freezer section. The
freezer section will start cooling.
The alarm will sound when the
appliance is switched on for the first
time as well as to warn you if the
temperature in the appliance has risen.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off the alarm
^
Press the alarm button.
The alarm stops. The bars will continue
flashing in the temperature display until
the temperature which has been set is
reached.
Cool pack
Place the cool pack in the top drawer of
the freezer section. The cool pack will
be at its most effective after it has been
in the freezer for approx. 24 hours.
Switching on and off
12