^
Hang the furniture door onto
adjusting bolts
a
.
^
Loosely attach the nuts
b
on the
adjusting bolts
^
Close the door and check the
distance between the door and
neighbouring furniture doors.
^
Align to match neigbouring doors if
necessary:
Side adjustments "X" are made by
sliding the furniture door, and height
adjustments "Y" by turning the
adjusting bolts
a
with a screwdriver.
To adjust depth "Z", loosen the
screws in the top of the appliance
door
c
.
By moving the furniture door, create a
gap of 2 mm between the furniture
door and the front edge of the niche.
^
Whilst counterholding the adjusting
bolts
c
, tighten nuts
b
using a
screwdriver.
^
Attach the fixing bracket
a
to the
appliance door by using screws
b
through the middle of the long slots.
^
Align the furniture door so that it is
parallel to the appliance door and
tighten screws
b
.
^
Screw the fixing bracket to the
furniture door using 4 x 14 mm chip
board screws
c
.
^
Finally fit the cover strip on the top of
the appliance door.
Installing the appliance
40