Before using for the first time
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
scratching during transportation.
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
^
Carefully remove the protective foil
from the stainless steel trim.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^
Press the On/Off button. The
temperature display will light up.
The temperature display for the
refrigerator section will show the
required temperature setting.
The appliance will start cooling down
and the interior light in the refrigerator
section will come on if you open the
door.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off
^
Press the On/Off button until the
temperature display goes out.
The interior light will not come on when
you open the door and the cooling
process will be switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^
switch the appliance off,
^
switch off at the wall socket and
withdraw the plug,
^
defrost the appliance,
^
clean the appliance out and
^
leave the doors ajar to air it.
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left
shut, there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
13
Содержание KD 12823 S
Страница 37: ...Appliance dimensions A B C KD 12823 S 1817 mm 600 mm 631 mm Installation 37 ...
Страница 46: ...46 ...
Страница 47: ...47 ...
Страница 48: ...Alteration rights reserved 1810 KD 12823 S M Nr 07 680 530 01 ...