Moving the shelves
The shelves can be adjusted according
to the height of the food.
^
Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^
Pull the front half of the glass shelf
forwards slightly and then push it
carefully under the rear half.
To move the split shelf:
^
Take both halves of the split glass
shelf out,
^
fit the two brackets onto the supports
on either side at the required height,
^
and push the glass shelves in one
after the other.
The shelf with the raised edge must
be at the back.
Fruit and vegetable containers
on roller insert
(depending on model)
The fruit and vegetable containers are
pushed in and out on rollers, and can
be completely removed if necessary.
The roller inserts can also be removed
for cleaning.
Adjusting the interior fittings
23
Содержание K 9454 iF
Страница 41: ...Niche height mm A K 9454 iF 1220 1236 Building in dimensions 41 ...
Страница 54: ...54 ...
Страница 55: ...55 ...
Страница 56: ...Alteration rights reserved 0609 K 9454 iF M Nr 07 297 090 02 ...