Miele K 8952 SD ed-1 Скачать руководство пользователя

Страница: 33 / 36

Align the door with the appliance
housing using the long slot in hinge
plate

. Then tighten screw

Refit plinth fascia

, pushing it firmly

into position.

With the door open, position cover

in the front of the plinth facing, and
push it firmly into position.

Refitting the handle:

Please make sure you follow the
instructions below carefully when
you refit the handle. The door seal
will be damaged if the handle is
fitted incorrectly.

Loosely attach the handle to the
opposite side of the door with the two
front screws

Mounting plate

must be positioned

on the side of the door so that when the
door is

closed

it is flush with the side of

the appliance.
If this is not the case,

Tighten the two grub screws

with

the allen key provided until mounting
plate

lines up correctly.

Then tighten all 4 fixing screws

Slide the side section of the handle

into the guides on the mounting

plate until it clicks into place.

It is important to check that the side
section of the handle

, does not

come into contact with the door seal
when opening the door, as this
would damage the door seal
permanently.

If, after you have refitted the handle,
you find that the side section does
touch the door seal when the door is
opened:

Realign mounting plate

with grub

screws

until the mounting plate

and the side section of the handle

are at the correct angle and the side
section does not touch the seal when
the door is opened.

Changing the door hinging

Содержание K 8952 SD ed-1





































Результаты поиска

Содержание K 8952 SD ed-1

Отзывы:

Похожие инструкции для K 8952 SD ed-1

Бренды по названию

Популярные бренды

Miele K 8952 SD ed-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 8952 SD ed-1

Отзывы:

Похожие инструкции для K 8952 SD ed-1

Бренды по названию

Популярные бренды