Miele K 8952 SD ed-1, Инструкции по эксплуатации и монтажу

Страница: 32 / 36

^
Open the door, tilt it downwards and
take it off.
^
Remove cover
f
, and unscrew hinge
bracket
g
.
^
Fit hinge pin
h
in the second hole of
hinge bracket
g
.
^
Refit bracket
i
and cover
j
turned
through 180° on the opposite side.
^
Screw hinge bracket
g
into the
opposite side.
The
M4 screw has to be screwed into
the left hole of the hinge bracket.
^
Turn cover
f
through 180°, and fit it
on the other side.
^
Remove spacer
k
with a screwdriver
and refit it on the opposite side.
^
Remove plug
l
from the door
bearing bush in the door and refit on
the opposite side.
^
Unscrew tappet
m
.
Keep it in a safe place just in case
you ever decide to change the door
hinging back to right hand hinging.
^
Screw the tappet supplied
n
into the
opposite side using the same screw
o
.
^
Hang the door on hinge pin
h
and
then close the appliance door.
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
^
Turn door support
b
through 180°,
pull hinge pin
a
out, and then fit both
parts into hinge plate
f
:
To do this push hinge pin
a
the other
way round through hinge plate
f
into
door support
b
. Swing the door
support in, push upwards and
re-assemble with screw
c
.
Changing the door hinging
32