Miele K 8867 S-1, Инструкции по эксплуатации и монтажу

Страница: 35 / 40

^
Refit plinth fascia
d
, pushing it firmly
into position.
^
With the door open, position cover
e
in the front of the plinth fascia, and
push it firmly into position.
Refitting the handle:
Please make sure you follow the
instructions below carefully when
you refit the handle. The door seal
will be damaged if the handle is
fitted incorrectly.
^
Loosely attach the handle to the
opposite side of the door with the two
front screws
b
.
The mounting plate
c
must be
positioned on the side of the door so
that when the door is closed it is flush
with the appliance outer wall.
If this is not the case
^
Tighten the two adjustable grub
screws
a
with the allen key provided
until mounting plate
c
is at the
correct angle.
^
Tighten the 4 outer screws
b
.
^
Slide the side section of the handle
d
into the guides on the mounting
plate until it clicks into place.
It is important to check that the side
section of the handle
d
, does not
come into contact with the door seal
when the handle is pulled to open
the door, as this would damage the
door seal permanently.
If, after you have refitted the handle,
you find that the side section does
touch the door seal when the door is
opened:
^
Use adjustable grub screws
a
to
realign mounting plate
c
so that the
mounting plate and the side section
of the handle
d
are at the correct
angle and that the side section does
not touch the door seal when the
door is opened.
Changing the door hinging
35